■ 디자인보호법 시행규칙 [별지 제19호서식] <개정 2021. 6. 10.>

국제출원서

DM/1 (E)

HAGUE AGREEMENT

CONCERNING THE INTERNATIONAL REGISTRATION OF INDUSTRIAL DESIGNS

APPLICATION FOR INTERNATIONAL REGISTRATION

For instructions on the completion of this form, refer to the section

“How to submit an international application to the International Bureau” of the Hague Guide for Users.

IMPORTANT

1. We strongly recommend that you file your international application through eHague.

2. If you are not using eHague, please submit the present form directly to the International Bureau via Contact Hague.

3. The international application may contain several industrial designs (but may not exceed 100).  However, all the industrial designs and/or products in relation to which such designs are to be used must belong to the same class of the International (Locarno) Classification.  The list of classes and subclasses of the Locarno Classification, together with Explanatory Notes, is available on the WIPO website.  Refer also to footnote 2 in Item 6.

4. Where an item of this form is mandatory, it is indicated in parentheses next to its title “(mandatory)”. Where an item is mandatory following a certain designation, it is indicated in a footnote at the end of the item.

5. The application must be typed.

6. Photographs and other graphic representations of the industrial designs should be pasted or printed directly onto a separate sheet of A4 paper, white and opaque (in compliance with instructions in the Guide).

7. Security clearance is required by the laws of the Russian Federation and the United States of America.  It is a requirement under the law of the Russian Federation that designs created in the Russian Federation by Russian legal entities or nationals are subject to a security clearance procedure by the Federal Service for Intellectual Property (ROSPATENT) to ensure that the designs do not contain state secrets.  It is a requirement under the law of the United States of America that, for designs created in the United States of America, the applicant first obtains a license from the United States Patent and Trademark Office (USPTO) before filing outside of the United States of America.

FEE CALCULATOR

8. A Fee Calculator is available on the WIPO website.

ANNEXES

9. Annex I allows the applicant to submit a Declaration of Inventorship, or, if not possible, a Substitute Statement in Lieu of a Declaration of Inventorship, in respect of a designation of the United States of America. It is mandatory if the United States of America is designated.

10. Annex II allows the applicant to submit documentation in support of a declaration concerning exception to lack of novelty in respect of a designation of the Republic of Korea (refer to item 15).

11. Annex III allows the applicant to identify information known by the applicant to be material to the eligibility for protection of the industrial design(s) concerned in respect of a designation of the United States of America.

12. Annex IV allows the applicant to support a claim of micro entity status (refer to item 18) with a micro entity certification in order to benefit from a reduction of the individual designation fee in respect of a designation of the United States of America.

13. Annex V allows the applicant to submit documentation in support of a priority claim in respect of a designation of the Republic of Korea (refer to item 13).

This cover page must not be sent to the International Bureau.

World Intellectual Property Organization

34, chemin des Colombettes, P.O. Box 18,

1211 Geneva 20, Switzerland

Tel.:  +41 (0)22 338 7575

Internet:  www.wipo.int

For further information, please Contact Hague

210㎜×297㎜[백상지 80g/㎡]

DM/1 (E)

APPLICATION FOR INTERNATIONAL REGISTRATION

For use by the applicant

Your Reference:

This international application contains the following number of continuation sheets:

This international application is accompanied by the following Annex(es):

𐤜 Ⅰ   𐤜 Ⅱ   𐤜 Ⅲ   𐤜 Ⅳ  𐤜 Ⅴ

For use by the Office of indirect filing

OFFICE TRANSMITTING THE INTERNATIONAL APPLICATION

(if applicable)

Name of the Office:

Office reference:

Date of receipt of the international application

by the Office:

Signature and/or seal of the Office:

APPLICANT (all fields are mandatory except where indicated otherwise)

1

(a) Applicant is a (check only one box):

𐤜 Natural person – Family name:                          Given name:

𐤜 Legal entity – Official designation:

(b) Address:

Postal code:                      City:                       Country:

(c) E-mail1 :

(d) Telephone2 :

1   All communications concerning this international application and the resulting international registration will be sent only to the email address indicated above, unless an alternative email address for correspondence is indicated in item 4 or a representative is appointed.  The applicant must ensure that the email address indicated above is correct and kept up to date.

2   Indicating a phone number is not required, but it will allow the International Bureau to reach you if needed.

ENTITLEMENT TO FILE (mandatory)

2

With respect to each of the entitlement criteria (a) to (d) below, indicate the corresponding Contracting Party or Parties.  If any item is not applicable, write “None”.  A list of the Contracting Parties bound by the 1999 Act and/or the 1960 Act is attached to the present form.  Under item (d), only a Contracting Party bound by the 1999 Act may be indicated.  Where entitlement is derived from a connection with a Contracting Party that is a member State of an intergovernmental organization (European Union or African Intellectual Property Organization (OAPI)), both that member State and that intergovernmental organization should be indicated (such as “France, European Union”) with respect to any of the corresponding criteria;  where entitlement is derived from a connection with a member State of an intergovernmental organization that is not a Contracting Party, only that intergovernmental organization should be indicated.

(a)   Nationality:

(b)   Domicile:

(c)   Real and effective industrial or commercial establishment:

(d)   Habitual residence:

APPLICANT’S CONTRACTING PARTY (mandatory where the 1999 Act applies)

3

Indicate the Contracting Party or one of the Contracting Parties, bound by the 1999 Act and mentioned in item 2, that is to be considered as the applicant’s Contracting Party.

If no applicant’s Contracting Party is indicated and the international application is filed through the Office of a Contracting Party that is indicated in item 2, the indication of that Contracting Party is deemed to be the applicant’s Contracting Party.

Applicant’s Contracting Party:

□ If there are several applicants, check this box and use a continuation sheet, giving the above required information under items 1, 2 and 3 for each applicant.

ADDRESS FOR CORRESPONDENCE

4

Where there are several applicants with different addresses and no representative is appointed, an address for correspondence must be indicated.  Where no such address has been indicated, the address of the first person indicated in item 1 shall be treated as the address for correspondence.

Address for correspondence:

Postal code:                   City:                          Country:

E-mail:

APPOINTMENT OF A REPRESENTATIVE (if any)

5

The person identified below is hereby appointed as the representative of the applicant.

(a) Representative is a (check the appropriate box)3:

𐤜 Natural person – Family name:                          Given name:

𐤜 Legal entity – Official designation:

(b) Address:

Postal code:                      City:                       Country:

(c) E-mail4:

(d) Telephone5:

𐤜 a power of attorney is attached to the present form (optional).

3   Only one box should be checked. If both boxes are checked, the name of the representative will be recorded with the name of the natural person preceding the name of the legal entity.

4   When a representative is appointed, all communications concerning this international application and the resulting international registration will be sent only to the email address of the representative. The applicant and the representative must ensure that the email address indicated above is accurate and kept up to date.

5   Indicating a phone number is not required, but it will allow the International Bureau to reach your representative if needed.

NUMBER OF INDUSTRIAL DESIGN(S), REPRODUCTION(S) AND/OR SPECIMEN(S) (mandatory)

6

Total number of industrial designs (maximum of 100)6:

Total number of reproductions:              Black and white:               Color:

Total number of A4 pages comprising reproductions:

(d)  Total number of specimens (if any):

6   If the application includes more than one industrial design and designates Estonia, Kyrgyzstan, Mexico, Romania, the Russian Federation, the Syrian Arab Republic, Tajikistan, the United States of America or Viet Nam, it is strongly recommended to refer to the Hague Guide for Users, International Application – Item 6.

DESIGNATED CONTRACTING PARTIES (mandatory - no Contracting Parties may be added afterwards.)

7

Indicate, by ticking the appropriate box, each Contracting Party where protection is sought. The designated Contracting Party must be bound by an Act – the 1999 Act and/or the 1960 Act – to which at least one of the Contracting Parties indicated in item 2 is also bound (a list of Contracting Parties is annexed to the present form):

□ AL	Albania

□ AM	Armenia

□ AZ	Azerbaijan

□ BA	Bosnia and Herzegovina

□ BG	Bulgaria

□ BJ	Benin

□ BN	Brunei

Darussalam

□ BW	Botswana

□ BX	Benelux

□ BZ	Belize

□ CA	Canada8

□ CH	Switzerland

□ CI	Côte d’Ivoire

□ DE	Germany

□ DK	Denmark

□ EE	Estonia

□ EG	Egypt

□ EM	European

Union

□ ES	Spain

□ FI	Finland7

□ FR	France

□ GA	Gabon

□ GB	United Kingdom

□ GE	Georgia

□ GH	Ghana7

□ GR	Greece

□ HR	Croatia

□ HU	Hungary7

□ IL	Isreal8

□ IS	Iceland7

□ IT	Italy

□ JP	Japan

□ KG	Kyrgyzstan

□ KH	Cambodia

□ KP	Democratic

People’s

Republic of

Korea

□ KR	Republic of

Korea8

□ LI	Liechtenstein

□ LT	Lithuania

□ LV	Latvia

□ MA	Morocco

□ MC	Monaco

□ MD	Republic of

Moldova

□ ME	Montenegro

□ MK	North Macedonia

□ ML	Mali

□ MN	Mongolia

□ MX	Mexico7

□ NA	Namibia

□ NE	Niger

□ NO	Norway

□ OA	African Intellectual Property Organization

□ OM	Oman

□ PL	Poland

□ RO	Romania

□ RS	Serbia

□ RU	Russian Federation

□ RW	Rwanda

□ SG	Singapore

□ SI	Slovenia

□ SM	San Marino

□ SN	Senegal

□ SR	Suriname

□ ST	Sao Tome and Principe

□ SY	Syrian Arab Republic

□ TJ	Tajikistan

□ TM	Turkmenistan

□ TN	Tunisia

□ TR	Turkey

□ UA	Ukraine

□ US	United States of

America9

□ VN  Viet Nam

□ WS	Samoa

7  If Finland, Ghana, Hungary, Iceland and/or Mexico is/are designated, it is mandatory to indicate, in item 11, the identity of the creator.  The latter declares to be the creator of the industrial design.  Where the person identified as the creator is a person other than the applicant, it is hereby stated that the present international application has been assigned by the creator to the applicant.

8   Generally, products belonging to class 32 of the Locarno Classification cannot receive protection under the laws of Canada, Israel and the Republic of Korea.  Consequently, a designation of Canada, Israel or the Republic of Korea in an international registration for industrial designs in class 32, would be the subject of a refusal by their respective Office.

9   If the United States of America is designated, it is mandatory to indicate, in item 11, the identity of the creator and to submit an oath or declaration of inventorship using Annex I.

PRODUCTS WHICH CONSTITUTE THE INDUSTRIAL DESIGN OR IN RELATION TO WHICH IT IS TO BE USED (mandatory) (see note 1 on cover page)

8

Locarno Class to which the industrial design(s) belong(s) (optional) :

■    No. of the design

(in numerical order)

Total number of reproductions

Product(s)

Subclass (optional)

□ If the space provided is not sufficient, check this box and use a continuation sheet.

DESCRIPTION10, 11, 12

9

Only the characteristic features of the industrial design(s) that appear in (a) reproduction(s) should be described.  In addition, matter which is shown in a reproduction but for which protection is not sought may be indicated in the description (and/or by means of dotted or broken lines or coloring in the reproduction).  The description can further disclose the operation or possible use of the industrial design as long as it is not technical.  Furthermore, the omission of a specific view may be indicated.  If the description exceeds 100 words, an additional fee of 2 Swiss francs per word exceeding 100, shall be payable.

□ If the space provided is not sufficient, check this box and use a continuation sheet.

10   If the Syrian Arab Republic is designated, a brief description of the reproduction or of the characteristic features of the industrial design is mandatory.

11   If Romania or Viet Nam is designated, a brief description of the characteristic features of the design is mandatory.

12   If the Russian Federation is designated, ROSPATENT recommends that a brief description of the characteristic features of the industrial design be provided.

DESCRIPTION OF THE REPRODUCTION (LEGENDS) OF THE INDUSTRIAL DECISION(S)13

10

Associate the number in the margin of your reproduction (eg. 1.1, 1.2, etc.) with the corresponding code:
1 Perspective;  2 Front;  3 Back;  4 Top;  5 Bottom;  6 Left;  7 Right;  8 Reference;
9 Unfolded;  10 Exploded; 11 Cross-sectional;  12 Enlarged;  00 Other (limited to 40 characters)

No.	Code	Legend (max 40 characters, where code 00 has been indicated)	No.	Code	Legend (max 40 characters, where code 00 has been indicated)

□ If the space provided is not sufficient, check this box and use a continuation sheet.

13	Recommended for a designation of Japan and the United States of America. For more information, including some other Contracting Parties, it is recommended to refer to the Guidance on Preparing and Providing Reproductions in Order to Forestall Possible Refusals on the Ground of Insufficient Disclosure of an Industrial Design by Examining Offices.

IDENTITY OF THE CREATOR14

11

If no industrial design is indicated, it is understood that the identity of the creator relates to all industrial designs included in the present application.

■ No. of the design (in numerical order)	Creator(s)
	Family name				Given name
	Address
	Postal code		City			Country
	Family name				Given name
	Address
	Postal code		City			Country
	Family name				Given name
	Address
	Postal code		City			Country

□ If the space provided is not sufficient, check this box and use a continuation sheet.

14	If Bulgaria, Finland, Ghana, Hungary, Iceland, Japan, Mexico, the Republic of Korea, Romania, the Russian Federation, Serbia, Tajikistan, Turkey or the United States of America is designated in item 7, this information is necessary (refer to the Hague Guide for Users, “Identity of the creator”).

CLAIM (Applicable only to the designation of the United States of America and/or Viet Nam)15

12

United States of America16: The ornamental design for	as shown and described.
Viet Nam:  By designating Viet Nam in item 7, the applicant is making the following claim: “Application for overall protection for industrial design(s) as shown and described.”

15	If the United States of America or Viet Nam is designated in item 7, this information is mandatory.

16	Indicate an article in the blank space provided.  Only one article shall be indicated, irrespective of the number of industrial designs contained in the present international application.

PRIORITY CLAIM - Article 4 of the Paris Convention17

13

□ The applicant claims the priority of the earlier filing(s) mentioned below.

Indicate the number of each industrial design for which the priority is claimed.  If no industrial design is indicated, it is understood that the priority claim relates to all industrial designs included in the present application.

■ Office of earlier filing	No. of earlier filing (if available)	Date of earlier filing (day/month/year)	No. of the design (in numerical order)	DAS code (if available)18	Annex V provided19
					□
					□
					□
					□
					□
					□

□ If the space provided is not sufficient, check this box and use a continuation sheet.

17	If Japan, Mexico, the Republic of Korea, the Russian Federation and/or the United States of America is/are designated, it is strongly recommended to refer to the Hague Guide for Users, International Application – Item 13.

18	The WIPO Digital Access Service (DAS) is an electronic system allowing priority documents to be securely exchanged between participating IP Offices.  If the Office of the earlier filing participates in DAS as a “depositing Office”, with respect to priority documents for industrial design applications, an access code may be obtained from that Office.  If the Office of a designated Contracting Party also participates in DAS as an “accessing Office”, with respect to priority documents for industrial design applications, the applicant may provide the access code in this item so that the latter Office is able to access the priority document via DAS.  For more information about DAS and its participating Offices, refer to the WIPO website.

19	Check the box if the priority document is provided using Annex V for the purpose of a designation of the Republic of Korea.  A priority document may not be provided for the purpose of designating any other Contracting Party and will be disposed of.

INTERNATIONAL EXHIBITION – Article 11 of the Paris Convention

14

□ The applicant claims that one or more designs were shown at an official, or officially recognized, international exhibition.

Indicate the number of each industrial design shown at the exhibition concerned.  If no industrial design is indicated, it is understood that all industrial designs were shown at the above indicated exhibition.

Place where exhibition was held
Name of the exhibition
Date on which product(s) was(were) first exhibited (day/month/year)		No. of the design (in numerical order)

□ If the space provided is not sufficient, check this box and use a continuation sheet.

EXCEPTION TO LACK OF NOVELTY (optional element applicable only to a designation of Japan and/or the Republic of Korea)

15

For more guidance, refer to the Hague Guide to Users, the International Application – Item 15.

Contracting Party concerned:	□ Japan	and/or     □ Republic of Korea

□ The applicant claims to benefit from exceptional treatment provided for in the design law of the Contracting Party(ies) concerned, for disclosure of all the industrial designs, or the industrial designs indicated below, included in the present application.

Supporting documentation may be submitted using Annex II (only for the designation of the Republic of Korea).  If Annex II is provided, check this box:    □

RELATION WITH A PRINCIPAL DESIGN (optional element applicable only to the designation of Japan and/or the Republic of Korea)

16

Under the national laws of Japan and the Republic of Korea one/some design(s) may be requested to be registered as (a) related design(s) in relation to the principal design (for more guidance, refer to the Hague Guide for Users, International Application – Item 16.

(a)	Check the appropriate box:
Contracting Party concerned:        □ Japan	and/or     □ Republic of Korea

□ The applicant requests all the industrial designs which are contained in the present international application
to be registered as a related design, or
□ The applicant requests the following industrial designs which are contained in the present international
application to be registered as a related design(s):

Indicate the number(s) of the industrial design(s) concerned.

(b)	Information concerning the principal design to which the design(s) indicated under item (a) are related
Check the appropriate box, and provide the required information.
(i) The principal design is the subject of:
□ the present international application
□ a prior international application designating the Contracting Party concerned (Japan and/or the Republic of Korea)
WIPO reference No.20:

□ a prior international registration designating the Contracting Party concerned (Japan and/or Republic of Korea)
International Registration No.:

□ a prior national application filed with the Office of the Contracting Party concerned (Japan and/or the Republic of           Korea)
Application No./Applicant’s reference:

□ a prior national registration at the Office of the Contracting Party concerned (Japan and/or the Republic of           Korea)
National registration No.:

(ii)	If the above national or international application or registration contains several industrial designs, indicate the
number of the industrial design to be considered as the principal design.
Design number of the principal design:

□ If the space provided is not sufficient, check this box and use a continuation sheet.

20	The WIPO Reference No. is indicated in the International Bureau’s acknowledgement of receipt of an international application (nine-digit number or "WIPO"+number).

PUBLICATION OF THE INTERNATIONAL REGISTRATION

17

Timing of publication (publication will take place, subject to weekly publication cycle, six months after the date of the international registration, unless the applicant requests one of the options below):

The applicant requests the immediate publication of the international registration	□

The applicant requests a deferment of publication	□

● Period of deferment requested (in months, starting from the earliest priority date if priority is claimed):

Important: The period of deferment of publication cannot exceed 30 months counted from the date of the international application, or if priority is claimed, from the priority date.  However:

□   if Iceland, Mexico, Poland, the Russian Federation, the United States of America or Viet Nam is designated, or if Hungary, Monaco or Ukraine is designated under the 1999 Act, the applicant may NOT request deferment of publication;

□   if Denmark, Finland or Norway is designated, the period of deferment cannot exceed 6 months;

□   if Israel is designated, the period of deferment cannot exceed 6 months from the filing date;

□   if the United Kingdom is designated, the period of deferment cannot exceed 12 months from the filing date;

□   if Singapore is designated, the period of deferment cannot exceed 18 months from the filing date;

□   if a Contracting Party is designated under the 1960 Act, or if Belize, Benelux, Brunei Darussalam, Cambodia, Croatia, Estonia, OAPI, Samoa, Slovenia, Suriname or the Syrian Arab Republic is designated, the period of deferment cannot exceed 12 months.

REDUCTION OF INDIVIDUAL DESIGNATION FEE (Applicable only to a designation of Israel, Mexico and/or the United States of America)

18

Israel

Check the box only if applicable:

□ The applicant is a natural person, a small entity whose yearly revenue does not exceed the amount set in the Israeli Design Regulations, or a higher education institution recognized by Israeli law, and no priority is claimed under item 13.

Important: For determination of entitlement to a fee reduction, please visit the Israel Patent Office (ILPO) website.

Mexico

Check the box only if applicable:

□ The applicant declares under oath to fall into one of the categories (a creator who is a natural person, a micro or small entity, a public or private higher education institution, or a public scientific or technological research institute) referred to in the first paragraph of the Fourth General Provision of the Agreement setting forth the fees for services provided by the Mexican Institute of Industrial Property (IMPI) and, accordingly, may pay only 50 percent of the corresponding fees.

Important: Applicants who wish to determine whether they are entitled to micro or small enterprise status should consult the “Agreement establishing the classification of micro, small and medium-sized enterprises” (only in Spanish).

United States of America

Check the appropriate box:

□ The applicant asserts small entity status within the meaning of Section 41(h) of Title 35 of the United States Code and Section 3 of the Small Business Act, and applicable regulations of the U.S. Patent and Trademark Office.

□ The applicant certifies micro entity status within the meaning of Section 123 of Title 35 of the United States Code and applicable regulations of the U.S. Patent and Trademark Office.  The applicant must submit the micro entity certification form PTO/SB/15A or PTO/SB/15B using Annex IV.

Important: For determination of entitlement to small entity status, please visit the USPTO website.

SIGNATURE BY THE APPLICANT OR HIS REPRESENTATIVE (mandatory)21

19

Applicant	Representative of the applicant22

Name:	Name:

Signature and/or seal:	Signature and/or seal:

Date of signature (day/month/year):	Date of signature (day/month/year):

Name of the person to contact, if necessary:

Email:	Telephone:

21	The international application form must be signed by the applicant or the representative. The signature may be hand written, printed, stamped or in electronic form.  Accepted forms of electronic signature are text-string, image, digital or computer generated signatures.

22	Item 5 must be completed.

PAYMENT OF FEES

□ The applicant has requested a deferment of publication (item 17(ii)) and wishes to pay the publication fees at a later date but not later than three weeks before the period of deferment expires.
1. INSTRUCTION TO DEBIT FROM A WIPO CURRENT ACCOUNT (if this box is completed, it is not necessary to complete item 2 below) The International Bureau is hereby instructed to debit the required amount of fees from the following WIPO current account: Holder of the account: Account number: Identity of the party giving the instruction:
2. METHOD OF PAYMENT
Identity of the party effecting the payment:
Payment made to WIPO bank account IBAN No. CH51 0483 5048 7080 8100 0 Credit Suisse, CH-1211 Geneva 70 Swift/BIC: CRESCHZZ80A	□	Payment identification	day/month/year
Payment made to WIPO postal account IBAN No. CH03 0900 0000 1200 5000 8 Swift/BIC: POFICHBE	□	Payment identification	day/month/year
Payment made to the Office of indirect filing □ (applicable to a filing through the United States Patent and Trademark Office)
GRAND TOTAL IN SWISS FRANCS (see note 6 on cover page or use the fee calculation sheet attached herewith)

FEE CALCULATION SHEET This sheet is provided for the convenience of users. It is not necessary to complete this sheet if the fee calculator has been used.
3. AMOUNT OF FEES (see Fee Calculator) (a) Basic fees23 for one design for each additional design 19 Swiss francs □ designs in addition to the first	397.--
(b) Publication fees23 Fee per reproductions 17 Swiss francs □ reproductions Fee per page on which reproductions are presented 150 Swiss francs □ page(s) in addition to the first
(c) Additional fee where the description exceeds 100 words23 2 Swiss francs □ words exceeding 100
(d) Designation fees (i) Standard designation fees23 (only for Contracting Parties that do not require individual designation fees) There are three levels of standard designation fees. The list following the present calculation sheet indicates which level applies for each Contracting Party. Level 1: 42 Swiss francs for the first design □ Contracting Parties + 2 Swiss francs □ designs in addition to the first □ Contracting Parties Level 2: 60 Swiss francs for the first design □ Contracting Parties + 20 Swiss francs □ designs in addition to the first □ Contracting Parties Level 324: 90 Swiss francs for first design □ Contracting Parties + 50 Swiss francs □ designs in addition to the first □ Contracting Parties ;

23	For international applications filed by applicants whose sole entitlement is a connection with a Least Developed Country (LDC), in accordance with the list established by the United Nations, these fees are reduced to 10% of the prescribed amounts.  For the exact applicable amounts, see the Fee Calculator.

24	For designs belonging to classes 1, 2, 3, 5, 9, 11 or 19 of the Locarno Classification, level 3 of the standard designation fee applies in respect of a designation of the Republic of Korea. For designs belonging to any other class, the individual designation fee applies.

(ii) Individual designation fee (payable only for the following Contracting Parties) Canada: 288 Swiss francs □ designs European Union: 67 Swiss francs for first design + 67 Swiss francs □ designs in addition to the first Hungary: 70 Swiss francs for first design + 17 Swiss francs □ designs in addition to the first Israel: 109 Swiss francs (or where item 18 applies, 65 Swiss francs) □ designs Japan: 682 Swiss francs □ designs Kyrgyzstan: 129 Swiss francs for first design + 64 Swiss francs □ designs in addition to the first Mexico: 98 Swiss francs (or where item 18 applies, 49Swiss francs) for the first design + 3 Swiss francs (or where item 18 applies, 1 Swiss franc) □ designs in addition to the first, for the first part of the fee25 OAPI: 83 Swiss francs for a single design / 124 Swiss francs for a multiple deposit (more than one design) Applicants from Least Developed Countries: 8 Swiss francs for a single design / 12 Swiss francs for a multiple deposit(more than one design) Republic of Korea24: 184 Swiss francs □ designs Republic of Moldova: 73 Swiss francs for first design + 7 Swiss francs □ designs in addition to the first Russian Federation: 138 Swiss francs for first design + 29 Swiss francs □ designs in addition to the first Turkmenistan: 589 Swiss francs for first design + 36 Swiss francs □ designs in addition to the first United States of America: 989 Swiss francs(or where item 18 applies, 495 Swiss francs for a small entity or 247 Swiss francs for a micro entity) for the first part of the fee26
GRAND TOTAL (SWISS FRANCS)

25	The individual designation fee for Mexico comprises two parts, the first part to be paid at the time of filing of the international application and the second part upon notification by the Mexican Institute of Industrial Property.

26	The individual designation fee for the United States of America comprises two parts, the first part to be paid at the time of filing of the international application and the second part upon invitation by the United States Patent and Trademark Office.

CONTRACTING PARTIES OF THE HAGUE AGREEMENT

(in respect of each Contracting Party, the table below provides indications of the Act or Acts binding that Contracting

Party and further indicates what kind of designation fee is payable for the designation of that Contracting Party27)

Contracting Parties of the Hague Agreement		Acts of the Hague Agreement
		1999 Act	1960 Act
(AL)	Albania	1	1
(AM)	Armenia	2
(AZ)	Azerbaijan	1
(BA)	Bosnia and Herzegovina	1
(BG)	Bulgaria	2	2
(BJ)	Benin		1
(BN)	Brunei Darussalam	3
(BW)	Botswana	1
(BX)	Benelux	1	1
(BZ)	Belize	1	1
(CA)	Canada	IF
(CH)	Switzerland	2	2
(CI)	Côte d’Ivoire		1
(DE)	Germany	2	2
(DK)	Denmark	2
(EE)	Estonia	2
(EG)	Egypt	1
(EM)	European Union	IF
(ES)	Spain	1
(FI)	Finland	3
(FR)	France	1	1
(GA)	Gabon		1
(GB)	United Kingdom	1
(GE)	Georgia	3	3
(GH)	Ghana	3
(GR)	Greece		1
(HR)	Croatia	2	2
(HU)	Hungary	IF	IF
(IL)	Israel	IF
(IS)	Iceland	3
(IT)	Italy		1
(JP)	Japan	IF
(KG)	Kyrgyzstan	IF	IF
(KH)	Cambodia	2
(KP)	Democratic People’s Republic of Korea	3	3
(KR)	Republic of Korea	IF/328
(LI)	Liechtenstein	1	1
(LT)	Lithuania	3
(LV)	Latvia	2
(MA)	Morocco		2
(MC)	Monaco	1	1
27 A numeral (1, 2 or 3) indicates the applicable level of standard designation fee and the letters “IF” indicate that individual designation fees are applicable (the amounts of all these fees are indicated in the Fee Calculation Sheet). Where no indication (numeral or letters) appears, this means that the Contracting Party is not bound by the corresponding Act. 28 For designs belonging to classes 1, 2, 3, 5, 9, 11 or 19 of the Locarno classification, level 3 of the standard designation fee applies in respect of a designation of the Republic of Korea. For designs belonging to any other class, the individual designation fee applies.

Contracting Parties of the Hague Agreement		Acts of the Hague Agreement
		1999 Act	1960 Act
(MD)	Republic of Moldova	IF	IF
(ME)	Montenegro	1	1
(MK)	North Macedonia	1	1
(ML)	Mali		1
(MN)	Mongolia	1	1
(MX)	Maxico	IF
(NA)	Namibia	1
(NE)	Niger		1
(NO)	Norway	2
(OA)	African Intellectual Property Organization (OAPI)	IF
(OM)	Oman	1
(PL)	Poland	2
(RO)	Romania	3	3
(RS)	Serbia	3	3
(RU)	Russian Federation	IF
(RW)	Rwanda	1
(SG)	Singapore	1
(SI)	Slovenia	1	1
(SM)	San Marino	1
(SN)	Senegal		1
(SR)	Suriname	1	1
(ST)	Sao Tome and Principe	1
(SY)	Syrian Arab Republic	3
(TJ)	Tajikistan	3
(TM)	Turkmenistan	IF
(TN)	Tunisia	2
(TR)	Turkey	1
(UA)	Ukraine	2	2
(US)	United States of America	IF
(VN)	Viet Nam	3
(WS)	Samoa	1