■ 디자인보호법 시행규칙 [별지 제19호서식] <개정 2018. 6. 28.>

특허로(www.patent.go.kr)에서 온라인으로 제출할 수 있습니다.

국제출원서

DM/1(E)

APPLICATION FOR INTERNATIONAL REGISTRATION

For use by the applicant

Your Reference:

This international application contains the following number of continuation sheets:

This international application is accompanied by the following Annexes:

𐤜 Ⅰ    𐤜 Ⅱ    𐤜 Ⅲ    𐤜 Ⅳ

For use by the Office of indirect filing

OFFICE TRANSMITTING THE INTERNATIONAL APPLICATION

(if applicable)

Name of the Office:

Office reference:

Date of receipt of the international application by the Office:

Signature and/or seal of the Office:

APPLICANT (Mandatory)

1

(a) Full Name:

(b) Address:

Postal code:                      City:                       Country:

(c) Telephone:                                       Fax:

E-mail address:

ENTITLEMENT TO FILE (Mandatory)

2

With respect to each of the entitlement criteria (a) to (d) below, indicate the corresponding Contracting Party or Parties.  If any item is not applicable, write "None".  A list of the Contracting Parties bound by the 1999 Act and/or the 1960 Act is attached to the present form. Under item (d), only a Contracting Party bound by the 1999 Act may be indicated.  Where entitlement is derived from a connection with a Contracting Party that is a member State of an intergovernmental organization (European Union or African Intellectual Property Organization (OAPI)), both that member State and that intergovernmental organization should be indicated (such as "France, European Union") with respect to any of the corresponding criteria;  where entitlement is derived from a connection with a member State of an intergovernmental organization that is not a Contracting Party, only that intergovernmental organization should be indicated.

(a)   Nationality:

(b)   Domicile:

(c)   Real and effective industrial or commercial establishment:

(d)   Habitual residence:

210㎜×297㎜[백상지 80g/㎡]

APPLICANT’S CONTRACTING PARTY (Mandatory where the 1999 Act applies)

3

Indicate the Contracting Party or one of the Contracting Parties, bound by the 1999 Act and mentioned in item 2, that is to be considered as the applicant’s Contracting Party.

If no applicant’s Contracting Party is indicated and the international application is filed through the Office of a Contracting Party that is indicated in item 2, the indication of that Contracting Party is deemed to be the applicant’s Contracting Party.

Applicant’s Contracting Party:

□ If there are several applicants, check box and use a continuation sheet, giving the above required information under items 1, 2 and 3 for each applicant.

ADDRESS FOR CORRESPONDENCE

4

Where there are several applicants with different addresses and no representative is appointed, an address for correspondence must be indicated.  Where no such address has been indicated, the address of the first person indicated in item 1 shall be treated as the address for correspondence. If there is only one applicant and no representative is appointed, this item should be completed only if the address for correspondence is different from the address given in item 1(b).

Address for correspondence:

Postal code:                   City:                          Country:

APPOINTMENT OF A REPRESENTATIVE (if any)

5

(a) Full Name:

(b) Address:

Postal code:                      City:                       Country:

(c) Telephone:                                       Fax:

E-mail address:

(c) To appoint a representative, the present international application must either be signed by the applicant

or be accompanied by a power of attorney (check the appropriate box):

□ item 19 of the international application is signed by the applicant

□ a power of attorney is attached to the present form

NUMBER OF INDUSTRIAL DESIGN(S), REPRODUCTION(S) AND/OR SPECIMEN(S) (Mandatory)

6

Total number of industrial designs (maximum of 100)1:

Total number of reproductions:              Black and white:               Color:

Total number of A4 pages comprising reproductions:

(d)  Total number of specimens (if any):

1   If the application includes more than one industrial design and designates Estonia, Japan, Kyrgyzstan, Romania, Syrian Arab Republic, Tajikistan or the United States of America, it is strongly recommended to refer to the Hague Guide for Users, International Application – Item 6, at http://www.wipo.int/hague/en/guide/ia.html

DESIGNATED CONTRACTING PARTIES (Mandatory - no Contracting parties may be added afterwards.)

7

Indicate, by ticking the appropriate box, each Contracting Party where protection is sought.  The designated Contracting Party must be bound by an Act – the 1999 Act and/or the 1960 Act – to which one of the Contracting Parties indicated in item2 is also bound (a list of Contracting Parties is annexed to the present form):

□ AL	Albania

□ AM	Armenia

□ AZ	Azerbaijan

□ BA	Bosnia and Herzegovina

□ BG	Bulgaria

□ BJ	Benin

□ BN	Brunei

Darussalam

□ BW	Botswana

□ BX	Benelux

□ BZ	Belize

□ CH	Switzerland

□ CI	Côte d’Ivoire

□ DE	Germany

□ DK	Denmark

□ EE	Estonia

□ EG	Egypt

□ EM	European Union

□ ES	Spain

□ FI	Finland2

□ FR	France

□ GA	Gabon

□ GE	Georgia

□ GH	Ghana2

□ GR	Greece

□ HR	Croatia

□ HU	Hungary2

□ IS	Iceland2

□ IT	Italy

□ JP	Japan

□ KG	Kyrgyzstan

□ KH	Cambodia

□ KP	Democratic

People’s

Republic of

Korea

□ KR	Republic of

Korea3

□ LI	Liechtenstein

□ LT	Lithuania

□ LV	Latvia

□ MA	Morocco

□ MC	Monaco

□ MD	Republic of

Moldova

□ ME	Montenegro

□ MK	The former Yugoslav Republic of Macedonia

□ ML	Mali

□ MN	Mongolia

□ NA	Namibia

□ NE	Niger

□ NO	Norway

□ OA	African Intellectual Property Organization

□ OM	Oman

□ PL	Poland

□ RO	Romania

□ RS	Serbia

□ RU	Russian Federation

□ RW	Rwanda

□ SG	Singapore

□ SI	Slovenia

□ SN	Senegal

□ SR	Suriname

□ ST	Sao Tome and Principe

□ SY	Syrian Arab Republic

□ TJ	Tajikistan

□ TN	Tunisia

□ TR	Turkey

□ UA	Ukraine

□ US	United States of

America4

2   If Finland, Ghana, Hungary and/or Iceland is/are designated, it is compulsory to indicate, in item 11, the identity of the creator. The latter declares that he believes himself to be the creator of the industrial design. Where the person identified as the creator is a person other than the applicant, it is hereby stated that the present international application has been assigned by the creator to the applicant.

3    Products belonging to class 32 (of the Locarno classification) cannot receive protection under the law of the Republic of Korea. Consequently, any designation of the Republic of Korea in an international registration for industrial designs in class 32, would be the subject of a refusal by the Korean Intellectual Property Office (KIPO).

4   If the United States of America is designated, it is compulsory to indicate, in item 11, the identity of the creator and to submit an oath or declaration of inventorship using Annex I.

PRODUCTS WHICH CONSTITUTE THE INDUSTRIAL DESIGN OR IN RELATION TO WHICH IT IS TO BE USED (Mandatory) (see note 1 on cover page)

8

Class to which the industrial design(s) belong(s) (optional) :

No. of the design

(in numerical order)

Total number of reproductions

Product(s)

Subclass (optional)

□ If the space provided is not sufficient, check this box and use a continuation sheet.

DESCRIPTION5, 6, 7

9

Only the characteristic features of the industrial design(s) that appear in (a) reproduction(s) should be described.  In addition, matter which is shown in a reproduction but for which protection is not sought may be indicated in the description (and/or by means of dotted or broken lines or coloring in the reproduction).  The description can further disclose the operation or possible use of the industrial design as long as it is not technical.  Furthermore, the omission of a specific view may be indicated.  If the description exceeds 100 words, an additional fee of 2 Swiss francs per word exceeding 100, shall be payable.

□ If the space provided is not sufficient, check this box and use a continuation sheet.

5   If the Syrian Arab Republic is designated, a brief description of the reproduction or of the characteristic features of the industrial design is required.

6   If Romania is designated, a brief description of the characteristic features of the design is required.

7   If the Russian Federation is designated, ROSPATENT recommends that a brief description of the characteristic features of the industrial design be provided.

DESCRIPTION OF THE REPRODUCTION (LEGEND)8

10

Associate the number in the margin of your reproduction with the corresponding code (eg. 1.1, 1.2, etc.):
1 Perspective;  2 Front;  3 Back;  4 Top;  5 Bottom;  6 Left;  7 Right;
9 Unfolded;  10 Exploded; 11 Cross-sectional;  12 Enlarged;  00 Other (limited to 40 characters)

No.	Code	Legend (max 40 characters, where code 00 has been indicated)	No.	Code	Legend (max 40 characters, where code 00 has been indicated)	No.	Code	Legend (max 40 characters, where code 00 has been indicated)

□ If the space provided is not sufficient, check this box and use a continuation sheet.

8	Recommended for a designation of Japan and the United States of America.

IDENTITY OF THE CREATOR9

11

No. of the design (in numerical order)	Creator’s full name	Address	Postal code	City	Country

If no industrial design is indicated, it will be understood that the identity of the creator relates to all industrial designs included in the present application.

□ If the space provided is not sufficient, check this box and use a continuation sheet.

9	If Bulgaria, Finland, Ghana, Hungary, Iceland, Japan, Norway, Republic of Korea, Romania, Russian Federation, Serbia, Tajikistan, Turkey or the United States of America is designated in item 7, this information is necessary (refer to the Guide, "Identity of the creator").

CLAIM (Applicable to the designation of the United States of America only)10

12

Indicate an article in the blank space provided. Only one article shall be indicated, irrespective of the number of industrial designs contained in the present international application.

CLAIM: The ornamental design for                           as shown and described.

10	If the United States of America is designated in item 7, this information is required.

PRIORITY CLAIM - Article 4 of the Paris Convention

13

□ The applicant claims the priority of the earlier filing mentioned below.

Indicate the number of each industrial design for which the priority is claimed.  If no industrial design is indicated, it will be understood that the priority claim relates to all industrial designs included in the present application.

Office of earlier filing	No. of earlier filing(if available)	Date of earlier filing (dd/mm/yyyy)	No. of the design (in numerical order)	Access code (if available)11	Annex V provided12
					□
					□
					□
					□
					□

□ If the space provided is not sufficient, check this box and use a continuation sheet.

11	The WIPO Digital Access Service (DAS) is an electronic system allowing priority documents to be securely exchanged between participating IP Offices.  If the Office of the earlier filing participates in DAS as a "depositing Office", with respect to priority documents for industrial design applications, an access code may be obtained from that Office.  If the Office of a designated Contracting Party also participates in DAS as an "accessing Office", with respect to priority documents for industrial design applications, the applicant may provide the access code in this item so that the latter Office is able to access the priority document via DAS.  For more information about DAS and its participating Offices, refer to the WIPO website:  http://www.wipo.int/das/en/.1

12	Check the box if the priority document is provided using Annex V for the purpose of a designation of the Republic of Korea.  A priority document may not be provided for the purpose of designating any other Contracting Party and will be disposed of.

If Japan, Republic of Korea, and/or the United States of America is/are designated, it is strongly recommended to refer to the Hague Guide for Users, International Application – Item 13, at www.wipo.int/hague/en/guide/ia.html#r13

INTERNATIONAL EXHIBITION – Article 11 of the Paris Convention

14

□ The applicant claims that one or more designs were shown at an official, or officially recognized, international exhibition.

Indicate the number of each industrial design shown at the exhibition concerned.  If no industrial design is indicated, it will be understood that all industrial designs were shown at the above indicated exhibition.

Place where exhibition has held	Name of the exhibition	Date on which product(s) was(were) first exhibited (dd/mm/yyyy)	No. of the design (in numerical order)

□ If the space provided is not sufficient, check this box and use a continuation sheet.

EXCEPTION TO LACK OF NOVELTY (optional element applicable to the designation of Japan and/or Republic of Korea only)

15

For more guidance, refer to the Guide to the International Registration of Industrial Designs, International Application – Item 15, at www.wipo.int/hague/en/guide/ia.html#r15.

Contracting Party concerned:	□ Japan	and/or     □ Republic of Korea

□ The applicant claims to benefit from exceptional treatment provided for in the design law of the Contracting Party(ies) concerned, for disclosure of all the industrial designs, or the industrial designs indicated below, included in the present application.

Supporting documentation may be submitted using Annex II (only for the designation of the Republic of Korea).  Annex II provided    □

RELATION WITH A PRINCIPAL DESIGN (optional element applicable to the designation of Japan and/or Republic of Korea only)

16

Under the national laws of Japan and the Republic of Korea one/some design(s) may be requested to be registered as (a) related design(s) in relation with the principal design (for more guidance, refer to the Guide to the International Registration of Industrial Designs, International Application – Item 16, at www.wipo.int/hague/en/guide/ia.html#r16).

(a)	Check the appropriate box:
Contracting Party concerned:        □ Japan	and/or     □ Republic of Korea

□ The applicant requests all the industrial designs which are contained in the present international application
to be registered as a related design, or
□ The applicant requests the following industrial designs which are contained in the present international
application to be registered as a related design(s):

Indicate the number(s) of the industrial design(s) concerned.

(b)	Information concerning the principal design  to which the design(s) indicated under item (a) are related
Check the appropriate box, and provide the required information.
(i) The principal design is the subject of:
□ the present international application
□ a prior international application designating the Contracting Party concerned (Japan and/or Republic of Korea)
WIPO reference13:

□ a prior international registration designating the Contracting Party concerned (Japan and/or Republic of Korea)
International Registration No.:

□ a prior national application filed with the Office of the Contracting Party concerned (Japan and/or Republic of Korea)
Application No./Applicant’s reference:

□ a prior national registration at the Office of the Contracting Party concerned (Japan and/or Republic of Korea)
National registration No.:

(ii)	If the above national or international application or registration contains several industrial designs, indicate the
number of the industrial design to be considered as the principal design.
Design number of the principal design:

□ If the space provided is not sufficient, check this box and use a continuation sheet.

13	WIPO reference is indicated in the International Bureau’s acknowledgement of receipt of an international application ("WIPOxxxxx (5 digits)" or "xxxxxxxxx (9 digits)").

PUBLICATION OF THE INTERNATIONAL REGISTRATION

17

Timing of publication (publication will take place, subject to weekly publication cycle, six months after the date of the international registration, unless the applicant requests one of the options below):

The applicant requests the immediate publication of the international registration	□

The applicant requests a deferment of publication	□

● Period of deferment requested (in months, starting from the earliest priority date if priority is claimed):

Important: The period of deferment of publication cannot exceed 30 months counted from the date of the international application, or if priority is claimed, from the priority date.  However:

□   if Iceland, Poland, Russian Federation or the United States of America is designated, or if Hungary, Monaco or Ukraine is designated under the 1999 Act, the applicant may NOT request deferment of publication;

□   if Denmark, Finland or Norway is designated, the period of deferment cannot exceed 6 months;

□   if Singapore is designated, the period of deferment cannot exceed 18 months from the filing date;

□   if a Contracting Party is designated under the 1960 Act, or if Brunei Darussalam, Cambodia, Croatia, Estonia, OAPI, Slovenia or the Syrian Arab Republic is designated, the period of deferment cannot exceed 12 months.

REDUCTION OF UNITED STATES OF AMERICA INDIVIDUAL DESIGNATION FEE (Applicable to the designation of the United States of America only)

18

Check the appropriate box:

□ The applicant asserts small entity status within the meaning of Section 41(h) of Title 35 of the United States Code and Section 3 of the Small Business Act, and applicable regulations of the U.S. Patent and Trademark Office.

Important: For determination of entitlement to small entity status, refer to   http://www.uspto.gov/sites/default/files/aia_implementation/AC54_Small_Entity_Compliance_Guide_Final.pdf.

□ The applicant certifies micro entity status within the meaning of Section 123 of Title 35 of the United States Code and applicable regulations of the U.S. Patent and Trademark Office.  The applicant must submit the micro entity certification form PTO/SB/15A or PTO/SB/15B using Annex IV.

SIGNATURE BY THE APPLICANT OR HIS REPRESENTATIVE (Mandatory)

19

Applicant	Representative of the applicant

Name:	Name:

Signature and/or seal:	Signature and/or seal:

Date of signature (dd/mm/yyyy):	Date of signature (dd/mm/yyyy):

Name of the person to contact, if necessary:

Telephone:	E-mail address:

FEE CALCULATION SHEET This sheet is provided for the convenience of users. It is not necessary to complete it if the fee calculator has been used.
3. AMOUNT OF FEES (see Fee Calculator: www.wipo.int/hague/en/fees/calculator.jsp) (a) Basic fees14 for one design for each additional design 19 Swiss francs □ designs in addition to the first	397.--
(b) Publication fees14 Fee per reproductions 17 Swiss francs □ reproductions Fee per page on which reproductions are presented 150 Swiss francs □ page(s) in addition to the first
(c) Additional fee where the description exceeds 100 words14 2 Swiss francs □ words exceeding 100
(d) Designation fees (i) Standard designation fees15 (only for Contracting Parties that do not require individual designation fees) There are three levels of standard designation fees. The list following the present calculation sheet indicates which level applies for each Contracting Party. Level 1: 42 Swiss francs for the first design □ Contracting Parties + 2 Swiss francs □ designs in addition to the first □ Contracting Parties Level 2: 60 Swiss francs for the first design □ Contracting Parties + 20 Swiss francs □ designs in addition to the first □ Contracting Parties Level 315: 90 Swiss francs for first design □ Contracting Parties + 50 Swiss francs □ designs in addition to the first □ Contracting Parties
(ii) Individual designation fee (payable only for the following Contracting Parties) European Union: 67 Swiss francs for first design + 67 Swiss francs □ designs in addition to the first Hungary: 70 Swiss francs for first design + 17 Swiss francs □ designs in addition to the first Japan: 665 Swiss francs □ designs Kyrgyzstan: 129 Swiss francs for first design + 64 Swiss francs □ designs in addition to the first OAPI: 83 Swiss francs for a single design / 124 Swiss francs for a multiple deposit (more than one design) Applicants from Least Developed Countries: 8 Swiss francs for a single design / 12 Swiss francs for a multiple deposit(more than one design) Republic of Korea15: 210 Swiss francs □ designs Republic of Moldova: 73 Swiss francs for first design + 7 Swiss francs □ designs in addition to the first Russian Federation: 206 Swiss francs for first design + 43 Swiss francs □ designs in addition to the first United States of 908 Swiss francs(or where item 18 applies, 454 Swiss francs for a small entity or 227 Swiss francs America: for a micro entity) for the first part of the fee16
GRAND TOTAL (SWISS FRANCS)
14 For international applications filed by applicants whose sole entitlement is a connection with a Least Developed Country (LDC), in accordance with the list established by the United Nations (http://www.un.org/en/development/desa/policy/cdp/ldc/ldc_list.pdf), these fees are reduced to 10% of the prescribed amounts. For the exact applicable amounts, see the Fee Calculator: www.wipo.int/hague/en/fees/calculator.jsp. 15 For international applications for designs belonging to any class of the Locarno classification other than 2, 5 and 19, the individual designation fee applies in respect of a designation of the Republic of Korea. For those designs belonging to classes 2, 5 and 19, level 3 of the standard designation fee applies. 16 The individual designation fee for the United States of America comprises two parts, the first part to be paid at the time of filing of the international application and the second part upon invitation by the United States Patent and Trademark Office.